LER Line Protector
Prevents bird excrement from fouling and building up on the insulator and tie. Available to fit pin and post type insulator and a wide range of conductor sizes.

LER Three Piece Birdguard
Offers a “safe place to perch”. Installed on a typical 3 phase 4 wire single crossarm structure with lowered neutral (RUS C1 type construction), this product allows birds to safely perch on the arm without causing an outage. Available to fit pin and post type, tie and clamp top insulators.

LER Triangle Antiperch
Prevents birds from landing on the crossarm and going phase-to-phase or phase-to-ground. UL rated schedule 40 PVC; supplied mounting hardware; no metal hardware above the crossarm.

LER "Swing Plate" Triangles
Low cost and easily installed using a shotgun stick from a bucket truck, or climbing the pole. This product has no springs or other moving parts to wear out. The swing plate swivels under the crossarm and tightens to provide a snug fit.

LER Nest Not
Prevent the accumulation of nesting material on the cross arms. Outages and structure fires can be caused by large birds nesting above insulators and conductors on the H-Frames.

LER Horizontal Birdguard
is designed to be used when the conductors are less than 5’ from the pole, or have less than 5 feet separation between conductors. Assembled, this product will provide a total of 120” pf protection (5’ from the center of the insulator in each direction).

LER Double Glass Birdguard
Installed on a typical 3 phase, 4 wire double crossarm structure (RUS C-9 construction), this product is available to fit pin and post-type insulators, tie and clamp types.

LER Wood Pole Cap
prevent birds from perching on top of the pole and simultaneously contacting the energized overhead conductor and the grounded hardware on the ridge pin support.